2370Copiers

Xerox 2370

Xerox 2370 was available for the market somewhere between 1982 and 1984. It made 10 copies in one minute. It could reduce from A3 to B4 or A3 to A4 size. The 2370 could also enlarge to 122%. The paper tray could hold up to 200 A4 paper.

The paper path inside the copier was quite simple. When the paper left the paper tray, a “gripper bar” with two clips opened and grabbed the paper and transported it under the drum, and through the fuser. The fuser unit was a heat roller and pressure roller, and the paper passed between the two rollers in order for the toner to melt into the paper.

The control panel consisted of the ordinary green Start print/copy button, and a wheel with quantity selector. For reduction/enlargement, there was three buttons- one for 86%, one for 71% and one for 122%. There was a display at the top/back end of the machine, where it showed symbols of ready and paper jam.

SPECIFICATIONS
Copy speed (per minute)10. First copy after 6.5 seconds.
Paper tray200 sheets
Output tray capacityn/a
Finisher/sorter
Staple function
Reduction/zoom
Document handler
Dimension and weight
Depth55 (cm) / 21.6 (inches)
Width80 (cm) / 31.4 (inches)
Height33 (cm) / 13 (inches)
Weight71 (K grams) / 156 (Lbs)
Floor space requirements2 x 2 (meters) / 6.6 x 6.6 (feet)

Do you have any more information about this model, or have brochures / pictures, please leave a reply in the form below, or send an email to xeroxnostalgia@outlook.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

0 Comments
Newest
Oldest Most Voted
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x