Xerox 2830
If you wanted to make a few copies on varying sizes or types of throughput, you don't have to change cassettes. Simply feed the different copy stock one sheet at a time into the single-sheet feeder.
The Xerox 2830 was also very quite when it operates. For large originals you could also detach the platen cover, in just a few seconds.
Below is the operating panel of the Xerox 2830.
Maximum number of copies one could enter was 99. If you're in the middle of a big copying job, and someone wants to make a few copies, you could touch the Job Interrupt button, make the copies, then go back to your job - the 2830 remembers exactly where it was before the interruption!
| IMAGES |
Xerox 2830
Xerox 2830 versatile
Man operating Xerox 2830
Xerox 2830 job interruption
Xerox 2830 controlpanel
| SPECIFICATIONS | |
|---|---|
| Copy speed (per minute) | 20. First copy after 6 seconds. |
| Paper tray | 250 sheets. |
| Output tray capacity | n/a |
| Finisher/sorter |  |
| Staple function | |
| Reduction/zoom | |
| Document handler | |
| Dimension and weight | |
| Depth | 60 (cm) / 23.6 (inches) |
| Width | 51.5 (cm) / 20.2 (inches) |
| Height | 30.5 (cm) / 12 (inches) |
| Weight | 75 (K grams) / 165 (Lbs) |
| Floor space requirements | Stationary: 1.60 x 1.80 (meters) / 8.3 x 5.9 (feet) Movable: 1.42 x 1.47 (meters) / 4.6 x 4.8 (feet) |
The 2830 was all analog. No hard drive, no memory card. there was an array of self focusing lens that transmitted the image directly on the drum when the platen scanned
does the 2830 have a memory card or retainable hard dirve?
No, not that I am aware of.
thank you 🙂
The 1035 was one of several reasons I left Xerox. I took a service call on one, and the lamp was intermittently dropping out. I got out my meter and troubleshot the issue to the circuit board, even tentatively id’d the component. I ordered one, and then promptly received a response that there were ZERO of these boards available fore the field, none had EVER gone out, and someone in Rochester wanted to know why in hell someone off the field had ordered one. They finally sent it. Well, a tech specialist came into the field with me, we went… Read more »
For a moving platen machine, this Fuji Xerox machine was a good little copier for its time. Notwithstanding the usual drum and drum cleaning issues, the only real trick to keeping these things running like new was avoiding Nashua developer and keeping the little glass plate under the fiber optics bar dust free. Even changing out the paper feed rollers was a snap. They could have put thicker Teflon coating on the heat rollers, though – those picker fingers had a nasty habit of gouging the heck out of them, requiring more than a few moments to change out. I… Read more »