Xerox 2370

Xerox 2370

Created: July 27, 2016 6:42 pm by Admin
Modified: July 18, 2017 8:46 am by Admin

Xerox 2370 was available for the market somewhere between 1982 and 1984. It made 10 copies in one minute. It could reduce from A3 to B4 or A3 to A4 size. The 2370 could also enlarge to 122%. The paper tray could hold up to 200 A4 paper.

The paper path inside the copier was quite simple. When the paper left the paper tray, a “gripper bar” with two clips opened and grabbed the paper and transported it under the drum, and through the fuser. The fuser unit was a heat roller and pressure roller, and the paper passed between the two rollers in order for the toner to melt into the paper.

The control panel consisted of the ordinary green Start print/copy button, and a wheel with quantity selector. For reduction/enlargement, there was three buttons- one for 86%, one for 71% and one for 122%. There was a display at the top/back end of the machine, where it showed symbols of ready and paper jam.

SPECIFICATIONS

 Dept

 Width

 Height

 Weight

 Floor Space Requirements (Meters/Feet)

(Centimeters) / (inches)

 55 / 21.6

 80 / 31.4

 33 / 13.0

 71 / 156 (K grams) / (Lbs) 

 2 x 2 / 6.6 x 6.6 (Meters) / (Feet)

Do you have any more information about this model, or have brochures / pictures, please leave a reply in the form below, or send an email to xeroxnostalgia@outlook.com

Be the first to comment

Leave a Reply

Your email address will not be published.


*


Do the math before submitting the form. * Time limit is exhausted. Please reload CAPTCHA.